NTC (negative temperature coefficient) thermistors are semiconductor ceramics whose resistance decreases with increasing temperature, making them essential components in various temperature sensing applications. Typically, ceramic materials are sintered at high temperatures exceeding 1,150°C. However, in laminated devices incorporating internal electrodes, co-sintering can lead to cracking and mechanical failure due to mismatches in the thermal expansion coefficients between the ceramic layers and metal-based electrodes. Moreover, the use of noble metal electrodes increases production costs. To address these challenges, a low-temperature sintering approach is required. Previous studies have demonstrated that incorporating glass frit can reduce the sintering temperature of ceramics, although this often results in increased electrical resistance. In this study, NiMnCoO₄ (NMC) ceramics, as a representative NTC thermistor composition, were prepared with the addition of 10 wt% glass frit. To mitigate the resulting increase in resistivity, trace amounts (1 wt%) of various metal oxides, including CuO, ZnO, and MnO, were introduced. Among these, the addition of CuO notably decreased both the resistivity and B constant values. In contrast, MnO had little effect on resistivity, while ZnO led to an increase. With respect to the B25/85 constant, samples containing MnO and ZnO exhibited higher values than those without metal oxide additives. These findings indicate that the incorporation of 1 wt% CuO is effective in reducing the increased resistivity in NMC ceramics subjected to low-temperature sintering via glass frit addition.

NTC thermistors are essential components widely used for temperature sensing in various electronic sensor applications. However, conventional NTC thermistor ceramics typically require high sintering temperatures above 1150℃, necessitating the use of high-cost noble metal electrodes such as palladium (Pd) or platinum (Pt), which increases the overall manufacturing cost. In this study, low-melting-point oxides were successfully introduced as sintering aids to reduce the sintering temperature of NiMnCoO₄-based semiconducting ceramics. As the additive content increased, the B constant and average grain size exhibited an increasing trend, while the sample containing 5 wt% additives showed the lowest room-temperature resistivity. Furthermore, samples sintered at 1000℃ demonstrated slightly higher room-temperature resistivity and B constant values compared to those sintered at 1150℃. These results confirm that the addition of low-melting-point oxides is effective in lowering the sintering temperature of NiMnCoO₄ ceramics, suggesting the potential for reducing production costs and improving design flexibility in thermistor fabrication.