In this work, we conducted a study on cell strings of high efficiency and high power solar cell modules via simulation. In contrast to the conventional module manufacturing method, the simulation was performed by connecting cutting cells divided into four parts from 6-in size using the electrically conductive adhesive (ECA). The resistance of the ECA added in series connection was extracted using an experimental method. This resistance was found to be 3 mΩ. Based on this simulation, we verified the change in efficiency of the string as a function of the number of cutting cell connections. Consequently, the cutting cell efficiency of the first 20.08% was significantly increased to 20.63% until the fifth connection; however, for further connections, it was confirmed that the efficiency was saturated to 20.8%. Connecting cutting cells using ECA improves the efficiency of the string; therefore, it is expected that it will be possible to fabricate modules with high efficiency and high power.

This paper presents an electrical feature analysis of hysteresis curves in memristor differential and intergral control circuit. After making macro model of the memristor device, electric characteristics of the model such as time analysis, frequency dependent DC I-V curves were performed by PSPICE simulation. Also, we made a circuit of memristor-capacitor based on nano-wired memristor device and analyzed the simulated PSPICE results. Finally, we proposed a memristor based differential or integral control circuit, analyzed hysteresis curve characteristic in the control circuit.

Citations

• The Importance of Rural Tourism in the Context of Sustainable Urban Development and Its Impact on Rural Development: The Case of Foça Kozbeyli
  Hayriye Oya SAF
  Kent Akademisi.2022; 15(4): 1835.     CrossRef

In this paper, we propose a numerical method to model temperature dependent threshold voltage shift observed in metal oxide thin-film transistors (TFTs). The proposed model is then implemented in AIM-SPICE circuit simulation tool. The proposed method consists of modeling the well-known stretched-exponential time dependent threshold voltage shift and their temperature dependent coefficients. The outputs from AIM-SPICE tool and the stretched-exponential model at different temperatures in the literature are compared and they show a good agreement. Since metal oxide TFTs are the promising candidate for flat panel displays, the proposed method will be a good stepping stone to help enhance reliability of fast-evolving display circuits.

Threshold voltage shift caused by trapping and release of charge carriers in a thin-film transistor (TF1`) is implemented in AIM-SPICE tool. Turning on and off voltages are alternatively applied to a TFT to extract charge trapping and releasing process. Each process is divided into sequentially ordered processes, which are numerically modeled and implemented in a computer language. The results show a good agreement with the experimental data, which are modeled. Since the proposed method is independent of TFT`s behavior models implemented in SPICE tools, it can be easily added to them.

Citations

• Modeling of stretched-exponential and stretched-hyperbola time dependence of threshold voltage shift in thin-film transistors
  Taeho Jung
  Journal of Applied Physics.2015;[Epub]     CrossRef

In this paper, we designed a charge pump circuit using level shifter for LED driver IC. The designed circuit makes the 15 V output voltage from the 5 V input in condition of 50 kHz switching frequency. The prototype chip which include the proposed charge pump circuit and its several internal sub-blocks such as oscillator, level shifter was fabricated using a 0.35 um 20 V BCD process technology. The size of the fabricated prototype chip is 2,350 um × 2,350 um. We examined performances of the fabricated chip and compared its measured results with SPICE simulation data.