Bismuth layer-structured ferroelectrics with high Curie temperatures have recently attracted significant attention as promising candidates for high-temperature piezoelectric applications. However, the conventional solid-state reaction method entails high-temperature processing that induces bismuth volatilization, thereby degrading device reliability. In this study, we employed a co-precipitation method enabling atomic-level mixing to significantly lower the synthesis temperature of Nb/Tadoped Bi₄Ti₃O₁₂ ceramics compared to the solid-state reaction method. Experimental results demonstrated that the coprecipitation method yielded a pure single phase at 600℃ without intermediate phases. Furthermore, the synthesized nanopowders, with an average size of 100 nm, lowered the onset temperature of sintering shrinkage to 650℃, approximately 200℃ lower than that of the solid-state counterpart. The low-temperature synthesis process proposed in this work is expected to contribute to the performance enhancement of high-temperature piezoelectric devices by effectively suppressing bismuth volatilization and ensuring compositional stability.

Ni-rich cathode materials have been developed as the most promising candidates for next-generation cathode materials for lithium-ion batteries because of their high capacity and energy density. In particular, the electrochemical performance of lithium-ion batteries could be enhanced by increasing the contents of nickel ion. However, there are still limitations, such as low structural stability, cation mixing, low capacity retention and poor rate capability. Herein, we have successfully developed the nanorod-type Ni-rich cathode materials by using co-precipitation method. Particularly, the nanorod-type primary particles of LiNi_0.7Co_0.15Mn_0.15O₂ could facilitate the electron transfer because of their longitudinal morphology. Moreover, there were holes at the center of secondary particles, resulting in high permeability of the electrolyte. Lithium-ion batteries using the prepared nanorod-type LiNi_0.7Co_0.15Mn_0.15O₂ achieved highly improved electrochemical performance with a superior rate capability during battery cycling.

Nano-size BaTiO3 powder was synthesized by relatively simple hydrothermal reaction method. Finely dispersed Ti hydroxide precursor was first precipitated using Ti(SO4)2 and NaOH solution by applying ultrasonic power and washed thoroughly to remove SO4 2- and Na+ ion. Then hydrothermal reaction was done at 160℃ for 6 hrs using solution prepared by washed Ti hydroxide precursor slurry and Ba(OH)2ㆍ8H2O with Ti:Ba mole ratio of 1:1. 200 ~ 500 nm size and uniform size distributed BaTiO3 powder was synthesized by relatively low temperature and simple process.

A highly strained nanostructure comprising crystallographically aligned HgTe nanoinclusions and a surrounding PbTe matrix has been synthesized using a precipitation process of supersaturated HgTe-PbTe alloys. From the early precipitation stage, HgTe nanoinclusions take disk shape, which is transformed from initial HgTe nuclei, although there is no lattice constant difference of the two end components at standard state. As a primary reason for the morphological transformation of the initial spherical HgTe nuclei to HgTe nanodisks, the induced lattice mismatch is suggested. On the condition that the HgTe nanodisks maintain perfect coherent nature with PbTe matrix, the stress-free lattice constant of constrained HgTe nanodisks has been calculated based on the defined concept of the strain-induced tetragonality, the linear elasticity and the actual measurement in HRTEM images.