Abstract
Long lifetime, low power consumption, and environmental friendliness have enabled light-emitting diode (LED) lighting to rapidly replace conventional light sources such as incandescent and fluorescent lamps. In particular, AC-LED lighting systems can be directly powered by commercial alternating current (AC) sources; however, they suffer from significant luminance deviation caused by uneven current distribution among LED light-emitting modules. This paper proposes a lighting control method that improves flicker performance while maintaining lamp brightness and effectively reduces luminance deviation in AC-LED lighting. The proposed method reduces luminance deviation by controlling the lighting order of multiple LED light-emitting modules. Among four LED modules, only the required number of modules is continuously turned on, and the lighting priority alternates between rectification cycles. Specifically, during odd rectification cycles, LED modules are activated sequentially in ascending order (11→12→13→14), whereas during even rectification cycles, they are activated in descending order (14→13→12→11). By alternately applying continuous lighting control with opposite activation orders, the proposed reverse alternating lighting control method equalizes the current distribution among LED modules. As a result, luminance uniformity is improved, electrical stress concentration on specific modules is reduced, and the operational lifetime of the LED modules is extended compared with the conventional fixed-sequence lighting control method.
