Lead-free bismuth sodium titanate (BNT)-based ceramics have attracted strong attention as environmentally benign dielectric materials for high-efficiency electrostatic energy-storage capacitors. A key challenge is that pristine BNT typically exhibits large hysteresis, high remnant polarization, and limited dielectric reliability, which restrict recoverable energy storage and efficiency under practical electric fields. Here, we present a focused mini-review of recent studies to clarify how composition design, phase boundary tuning, defect chemistry, and microstructural control collectively enable slim or pinched polarization-electric field (P-E) behavior and improved energy-storage functionality in BNT-related bulk ceramics. The reviewed outcomes consistently show that stabilizing relaxor states governed by polar nanoregions (PNRs), often via solid-solution engineering and secondary relaxor/antiferroelectric-like incorporation, suppresses irreversible switching and reduces hysteresis loss, while densification and grain-size control enhance electrical homogeneity and breakdown strength. In addition, defect-mediated tuning of oxygen vacancy-related complexes is highlighted as an independent lever to control relaxor ergodicity and polarization reversibility, providing a complementary route to slim-loop optimization. These insights are expected to guide integrated design strategies that couple phase/relaxor-state engineering with defect and microstructure optimization, accelerating the development of reliable, temperature-robust, lead-free dielectric capacitors based on BNT-related ceramics.

Metamaterials, as artificially engineered structures with unconventional mechanical and acoustic properties, have recently emerged as a transformative platform for enhancing the capabilities of triboelectric nanogenerator (TENG) systems. Since the invention of TENG devices, extensive efforts have been devoted to improving charge density, output stability, and overall performance. Conventional performance optimization strategies mainly rely on device-level improvements such as surface chemistry modification, microstructuring, and nanopatterning. However, limited emphasis has been given to system-level development of smart self-powered intelligent systems. The integration of metamaterials into TENG devices opens a new era by enabling frequency-selective localization, mechanical impedance matching, and controllable deformation pathways. These engineered mechanical structures not only improve energy harvesting efficiency but also introduce new functionalities into the system. This review systematically summarizes recent advances in metamaterial-integrated TENG systems across four major application domains: (i) energy harvesting, (ii) acoustic telecommunication and acoustic-to-electric conversion, (iii) self-powered sensing, and (iv) vibration suppression and monitoring. Overall, the integration of metamaterials into TENG systems will pave the way for next-generation sustainable, intelligent, self-powered devices with diverse functionalities.

The ability to manipulate and probe biomolecules at the single-molecule level has become an essential approach for understanding molecular interactions, conformational dynamics, and nanoscale transport phenomena. Advances in experimental techniques have enabled precise control of individual molecules with high spatial resolution and piconewton-level force sensitivity. These developments have significantly expanded the capability of studying biomolecular mechanics and dynamics beyond conventional ensemble measurements. A variety of physical strategies have been developed for single-molecule manipulation, including mechanical-force-based approaches, electric-field-driven methods, and nanoscale structural confinement techniques. Mechanical-force-based methods, such as optical tweezers, magnetic tweezers, and atomic force microscopy, enable direct measurement of molecular mechanical responses. Electric-field-based manipulation, represented by dielectrophoresis, allows noncontact control of particles and biomolecules through polarization effects in non-uniform electric fields. In addition, nanopore-based systems employ nanoscale confinement to regulate molecular transport and residence behavior. This review provides an overview of representative single-molecule manipulation techniques based on mechanical, electrical, and structural control and discusses their fundamental principles and implementation strategies.

The rapid advancement of large-scale language models and artificial intelligence technologies has highlighted the importance of data processing efficiency. This study outlines a measurement optimization method for high-speed pulse equipment to accurately analyze the operating dynamics of ReRAM, a core hardware component for simulating neural networks. An optimized evaluation methodology combining connection compensation and a dual-channel configuration was established to minimize measurement errors caused by parasitic resistance and capacitance during pulse measurements using the Keithley 4200A-SCS and 4225-PMU modules, and to address HRS/LRS measurement errors caused by mismatches between the measurement range and source limits. The proposed precision measurement guidelines can be applied to the evaluation of semiconductor devices that require pulse measurements, such as transistors and DRAM.

This paper proposes a circular sequential lighting control method to reduce current imbalance and luminance deviation among multiple LED modules in AC-powered LED lighting systems. Conventional fixed-sequence lighting control repeatedly prioritizes the same LED modules in every rectified voltage cycle, which leads to unequal current distribution, luminance non-uniformity, and the accelerated degradation of specific modules during long-term operation. To address these limitations, a circular sequential lighting strategy is introduced, in which the lighting order is cyclically rotated at every rectified cycle, ensuring that all LED modules experience equal lighting opportunities. A prototype AC-LED lighting system consisting of four series-connected LED modules was implemented and experimentally evaluated. The results demonstrate that, while the conventional fixed-sequence method produces a maximum average current deviation of up to 1.6 mA among modules, the proposed method equalizes the average current across all modules to approximately 17.1 mA. Furthermore, the flicker index remains at 0.13, which is comparable to that of the conventional method, indicating that luminance uniformity is improved without degradation of optical performance. The proposed circular sequential lighting control effectively distributes electrical stress, enhances luminance uniformity, and improves long-term reliability, making it a practical and efficient solution for high-quality AC-LED lighting applications.

GaN nanowire (NW)-based hybrid structures have attracted attention for optoelectronic applications due to their high surface area and efficient carrier transport. However, the optical transparency of GaN NWs is often limited by unintended residual species accumulated on the surface and in the inter-wire regions, as well as defect-related absorption, leading to reduced light transmission. In this work, we demonstrate that thermal annealing significantly improves the optical transparency of GaN NWs grown on indium tin oxide (ITO)/glass substrates. The transmittance increased from 47.9% to 78.5% at 550 nm after rapid thermal annealing at 800^oC for 3 min, while a comparable value (~75.5%) was achieved at 600^oC for 5 min. PbBr₃ was deposited onto the GaN NWs to form hybrid structures, and temperature-dependent photoluminescence (TDPL) measurements revealed enhanced emission stability with suppressed peak shift and reduced spectral broadening. Arrhenius analysis based on a two-channel model revealed that the activation energy of the dominant non-radiative recombination pathway increased from 62 meV in the as-grown sample to 85 meV after thermal annealing, while its relative contribution remained nearly unchanged. In contrast, the shallow trap-assisted pathway exhibited a similar activation energy of approximately 6 meV in both samples, but its contribution decreased from 0.35 to 0.17 after annealing. As a result, the internal quantum efficiency (IQE) improved from 75.9% to 87.4%. These results show that thermal annealing improves optical transparency by removing residuals and suppresses defect-related recombination, leading to enhanced carrier dynamics and improved optical performance of PbBr₃-based hybrid structures.

There is an increasing demand for freeform stretchable display technologies capable of overcoming spatial limitations in next-generation platforms such as augmented reality (AR) and virtual reality (VR). To realize such stretchable displays, all constituent materials—including semiconductors, electrodes, insulators, and substrates—must exhibit sufficient mechanical elasticity. To date, stretchable gate insulators have primarily relied on organic polymers such as poly(4-vinylphenol-co-methyl methacrylate) (PVP-co-PMMA). However, their practical application is significantly limited by poor electrical properties, including low dielectric constant and instability. In this work, we propose a novel gate insulator structure that minimizes the use of solution-based processes, which often suffer from poor uniformity and may damage underlying layers during fabrication. The proposed structure integrates the advantages of both organic and inorganic materials by employing a hybrid configuration. Specifically, high-k HfO₂ thin films are deposited on both the top and bottom of an organic layer composed of PVP-co-PMMA, poly(melamine-co-formaldehyde) (PMF) as a crosslinking agent, and propylene glycol monomethyl ether acetate (PGMEA) as a solvent. This inorganic–organic–inorganic structure effectively compensates for the inherent electrical limitations of organic materials. As a result, the fabricated thin-film transistors (TFTs) exhibit improved electrical performance and reliability compared to devices employing a single organic gate insulator.

Polymer nanocomposites incorporating inorganic nanofillers have emerged as highly promising electromagnetic interference (EMI) shielding materials, combining mechanical compliance with robust conductive percolation networks. Carbon nanotubes (CNTs) are particularly attractive as conductive fillers because their high aspect ratio facilitates percolation at low loadings. Also, CNTs offer superior mechanical durability under deformation compared to rigid, fracture-prone metal nanowires. For EMI shielding, high electrical conductivity is critical as it enhances both reflection and absorption through efficient charge dissipation and conduction losses. However, achieving highly aligned conductive pathways without degrading the intrinsic electrical properties of CNTs remains a significant challenge. Here, we demonstrate a non-destructive magnetic surface-functionalization and alignment strategy. Using a polydopamine (PDA)-mediated route, pristine multiwalled CNTs are uniformly decorated with Fe₃O₄ nanoparticles (FMWCNTs). This enables highly effective magnetic field-driven alignment at fields as low as 10 mT, promoting the strategic formation of percolation networks. By optimizing the Fe₃O₄/MWCNT ratio for high saturation magnetization and uniform coverage, the aligned FMWCNTs exhibit significant electrical anisotropy, delivering a 10.7-fold higher electrical conductivity in the parallel configuration compared to the vertical configuration. These findings present a scalable, room-temperature platform for engineering directionally enhanced conductivity in polymer nanocomposites, with broad applicability in advanced EMI shielding, flexible electronics, and advanced packaging technologies.

The expansion of smart healthcare and wearable electronics has intensified the need for fabric-based sensors that integrate conformally with the human body for continuous bio signal monitoring. However, the heavy reliance of conventional devices on external batteries remains a major obstacle to commercialization, necessitating the development of flexible piezoelectric energy harvesters that convert biomechanical energy into sustainable power. Here, we present a highly flexible and wearable piezoelectric energy harvester (PEH) fabricated by a screen-printing of BaTiO₃ nanoparticlePDMS composites onto a fabric substrate. An optimized piezo-ceramic filler concentration of 70 wt% yielded a peak output voltage of 0.52 V and a current of 40 nA under the mechanical bending deformations. The fabricated PEH demonstrated exceptional mechanical and electrical stability, showing no performance degradation of over 5,000 repetitive bending cycles. These results indicate that a PEH can function as a stable self-powered source within complex clothing environments, offering a promising pathway for next-generation autonomous wearable sensor systems.

β-Ga₂O₃ is an ultra-wide bandgap semiconductor promising for high-power electronic applications; however, heteroepitaxial growth on sapphire is challenging lattice and symmetry mismatch. In this study, β-Ga₂O₃ thin films were grown on C-plane sapphire substrates with various off-axis angles (0–12°) using mist-CVD, and the influence of substrate miscut on structural and optical properties was investigated. All films grown at 900°C exhibited (-201) oriented β phase. The crystal quality was strongly dependent on the off-axis angle, with intermediate off-axis angles (Δ_a = 6–8°) showing the narrowest rocking curve width. Off-axis substrates promoted step-aligned growth behavior compared to on-axis growth. Optical measurements revealed enhanced transmittance and wider bandgap values (4.92–4.95 eV) for off-axis samples compared to the on-axis film (4.69 eV). The findings provide practical guidelines for optimizing heteroepitaxial β-Ga₂O₃ growth on low-cost sapphire substrates for high-performance device applications.