Metal sacrificial-layer-assisted transfer is a promising strategy for transferring thermally annealed thin films onto flexible polymer substrates without exposing the receiver substrate to thermal damage. However, stable release of the annealed thin-film stack remains challenging because high-temperature annealing can alter the etching behavior of the sacrificial metal layer and the protective oxide layer. In this study, we propose a thin-film transfer process using a Ni metal sacrificial layer and etch access holes, in which an SU-8/Ti/SiO₂ transferable stack was fabricated on a rigid sapphire donor substrate, annealed at 400–700°C, selectively released by Ni etching, and transferred onto a flexible PET receiver substrate. As the annealing temperature increased from 400 to 700°C, the SiO₂ etch rate decreased from 6.8–6.96 to 2.61–3.83 nm/s, while the Ni release time increased from 72–77 to 82–95 min; nevertheless, the transferable stack was successfully transferred under all process conditions with image-based transfer yields of 58.81–82.76%, with the highest yield obtained for the 200 nm Ni sacrificial layer annealed at 550°C. These results demonstrate the process feasibility of the proposed metal sacrificial-layer and etch-access-hole-based transfer approach for transferring thermally annealed thin-film structures from rigid donor substrates to flexible receiver substrates.

The phase transition of Li₃PO₄ solid electrolyte for secondary batteries in vacuum has been studied by using real-time synchrotron X-ray scattering. According to the vacuum heating results, the crystal β-Li₃PO₄ phase was stable only from room temperature to 400°C. The crystal γ-Li₃PO₄ phase appeared at 410°C and the crystal β-Li₃PO₄ phase completely disappeared at 430°C. The transition from the β-Li₃PO₄ to the γ-Li₃PO₄ phases occurred primarily at 410°C, which is 40°C lower than the transition temperature of 450°C in air. The decrease in the phase transition temperature in vacuum, compared to that in air, is attributed to a relatively high concentration of oxygen vacancies. As the isothermal annealing time at 390°C was increased to 8 hours, the β-Li₃PO₄ phase was completely transitioned into the γ-Li₃PO₄ phase. Our study revealed the detailed transition behavior from the β-Li₃PO₄ to the γ-Li₃PO₄ phases during real-time annealing in vacuum.

X-ray photon correlation spectroscopy (XPCS) provides access to nanoscale dynamics, yet practical approaches for interpreting its data remain limited. This tutorial presents a systematic framework for XPCS data analysis, illustrated using measurements performed at the NSLS-II CHX beamline. The fundamental concepts of speckle pattern and the intensity autocorrelation function are introduced, followed by ferroelectric case studies demonstrating how polarization switching and phase transition dynamics can be extracted from XPCS measurements. The influence of the probed q-range experimental conditions such as X-ray transmittance is examined for data interpretation. These elements are consolidated into practical guidelines for the reliable analysis of XPCS data.

Two-dimensional van der Waals (2D vdW) magnets have attracted enormous attention as an emerging material platform for magnetism, spintronics, and multifunctional applications. Their single-crystalline layered structures, layer-number controllability, and unique 2D properties provide unique opportunities that are difficult to achieve in conventional magnetic materials. However, the discovery and development of new 2D magnetic compounds require considerable time and effort, and only a limited number of these materials have been reported to be suitable for practical use. Therefore, materials engineering based on already established 2D vdW magnets has become an important research direction to explore new characteristics and find a practical route for device applications. This review summarizes recent materials engineering pathways for 2D vdW magnets. The main contents focus on the engineering strategy through electrostatic, chemical, lattice, symmetry, and heterostructure ways. These approaches provide practical design routes for tailoring magnetic properties beyond intrinsic 2D vdW magnets. Further progress will require broader application to various types of materials and delicate optimization that connects expanding fundamental magnetism with electromagnetic device applications.

As technologies such as artificial intelligence, autonomous driving, the Internet of Things, wearable electronics, and edge computing continue to spread in the era of the Fourth Industrial Revolution, the importance of hardware security for the safe storage, transmission, and processing of large volumes of data has grown substantially. One of the key components of such security systems is the true random number generator (TRNG), which produces unpredictable random numbers for cryptographic use. In recent years, research on TRNGs has increasingly moved beyond conventional CMOS-based approaches toward semiconductor devices built from emerging materials. These material-based TRNGs offer several advantages, including high integration density, low power consumption, compact form factors, and strong suitability for next-generation edge and IoT environments, because they can directly exploit the intrinsic stochasticity of the device itself as an entropy source. In this review, recent studies on TRNGs based on emerging material-based semiconductor devices are examined from the perspectives of entropy sources, device structures, randomness validation, and wearable/flexible extensions. By bringing together the key physical mechanisms, device platforms, evaluation criteria, and prospects for wearable and flexible electronics in edge and IoT environments, this review aims to provide a useful framework for future research on hardware security devices.

We have studied the thermal stability of NCM622 cathode material for Li-ion batteries using real-time synchrotron x-ray scattering below 600°C in both air and vacuum. The expansion of the mean particle size, which reached maximum values of 10.3 μm in air and 10.6 μm in vacuum at 200°C, was attributed to the dehydration of intergranular water within the NCM622 powders. Across all annealing temperatures, the amount of crystal NCM622 phase in air was consistently higher than that in vacuum. The crystal domain sizes in air showed less variation than that in vacuum during annealing from RT to 500°C. These indicate that the crystal NCM622 phase is more thermally stable during annealing in air than in vacuum. This stability is attributed to the presence of 21% oxygen in air, which is absent under vacuum conditions.

The direct utilization of steelmaking by-product gases in solid oxide fuel cells (SOFCs) offers a promising pathway to improve energy efficiency and reduce carbon emissions in the steel industry. In this study, a Sr-deficient and Ni-doped double perovskite oxide, Sr_1.95Fe_1.35Ni_0.15Mo_0.5O_6-δ (SFNM), was investigated as an anode material for direct Linz-Donawitz converter gas (LDG)-fueled SOFCs. A single-phase double perovskite structure was successfully obtained after calcination at 1,200°C for 12 h, while exsolved metallic Ni nanoparticles were generated on the SFNM surface after reduction at 800°C. Electrochemical performance was evaluated using H₂, simulated-LDG, and CO/CO₂ (85:15) fuels at 800°C. The maximum power densities achieved were 1.23, 0.70, and 0.40 W cm^-2 for H₂, simulated-LDG, and CO/CO₂ fuels, respectively. Although CO-containing fuels exhibited lower opencircuit voltages and power outputs than H₂, the SFNM anode maintained stable operation and appreciable performance under direct simulated-LDG utilization. Impedance analysis revealed that the increased polarization resistance in simulated-LDG and CO/CO₂ atmospheres was mainly associated with fuel adsorption/desorption and gas diffusion, while interfacial charge-transfer resistance remained relatively small. The superior performance obtained with simulated-LDG compared to the CO/CO₂ mixture was attributed to the presence of a small amount of H₂, which facilitated anode reaction kinetics. These results demonstrate that SFNM is a promising mixed ionic-electronic conductor anode for the direct electrochemical conversion of CO-rich steelmaking by-product gases into electricity.

Quantum dots (QDs) are semiconductor nanocrystals with sizes on the order of several nanometers, whose bandgaps can be tuned by controlling the particle size. Owing to this bandgap tunability, QDs can absorb near-infrared (NIR) and short-wave infrared (SWIR) light, spectral regions that are difficult to access with conventional silicon-based devices. However, colloidal QDbased infrared photodetectors still suffer from intrinsically high dark current, trap-induced noise, and limited response speed. As a result, they exhibit fundamental performance gaps in terms of detectivity and speed–bandwidth product compared to epitaxial infrared detectors, highlighting the need for structural and architectural design strategies to overcome these limitations. In this review, we discuss recent advances in enhancing the spectral selectivity and sensitivity of infrared photodetectors through three-dimensional optical architectures, including metasurfaces and metamaterials. We focus in particular on design strategies and the underlying mechanisms responsible for performance enhancement, and we outline how structural approaches can be leveraged to effectively control the sensitivity and wavelength selectivity of QD-based infrared detectors.

The development of a large-area solution process for CuO nanowires, which are promising p-type thin film transistors (TFT) channel materials, is required. To overcome the limitations of the existing high-vacuum and high-cost deposition process, a large-area Cu nanowire network was formed on the substrate using the Mayer rod coating method, and a CuO channel was implemented by subsequent thermal annealing. Consequently, p-type TFT with an on/off current ratio of 1.4×10⁴ and a field-effect mobility µ_FE≈10^-4 cm²/(V⋅s). was fabricated and optimized. X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) analyses showed that the sample annealed at 200°C exhibited an incomplete oxidation state with a mixed Cu/Cu₂O phase and a high fraction of M-OH species (58.78%), resulting in a low on/off current ratio (≈1.2). In contrast, annealing at 450°C leads to a CuOdominant phase, where the fraction of lattice oxygen(O1) increases to 31.11% and the oxygen vacancy (VO) component increases to 7.15%, indicating a significant improvement in hole concentration and charge transport. These phase transitions and surface chemical changes are identified as the key mechanisms for the enhanced TFT switching characteristics. The low-cost, large-area Mayer rodbased solution process proposed in this study provides a basic process platform for p-type TFTs applicable to flexible wearables and display technologies and suggests the possibility of commercialization through additional optimization of bias stability in the future.

With the rapid expansion of electric vehicles (EVs) and energy storage systems (ESS), ensuring the operational safety of lithium-ion batteries has become a critical technical challenge. Conventional battery management systems (BMS) primarily rely on threshold-based rule logic, which is limited in detecting coupled anomalies and early-stage degradation patterns. In this study, a deep learning-based framework for multivariate anomaly detection is proposed using BMS sensor data, including voltage, current, temperature, state of charge (SOC), and state of health (SOH). Five representative fault scenarios were defined, including thermal runaway precursors, cell voltage imbalance, SOC inconsistency, internal resistance increase, and communication delay. The proposed CNN-LSTM model was compared with conventional Rule-based methods and machine learning models, including Isolation Forest, Autoencoder, and LSTM. Experimental results show that the proposed model achieved the highest performance, with an F1-score of 0.885, an AUC of 0.94, and a detection delay of 8.1 s. In contrast, the Rule-based method exhibited a significantly higher false negative rate of 42.0%, indicating limitations in detecting complex anomaly patterns. These results demonstrate that the proposed spatiotemporal deep learning approach can significantly improve the accuracy and responsiveness of battery anomaly detection. Furthermore, the proposed method is expected to contribute to enhancing safety, reliability, and predictive diagnostics in next-generation intelligent BMS platforms.

This study proposes an optimization strategy for the over-current protection (OCP) parameters of a lithium iron phosphate (LiFePO₄, LFP) battery system used in electric golf carts operating under high motor-load conditions. Real-world hillclimbing tests were conducted under four clearly defined payload/passenger conditions to analyze the transient discharge-current pro-file, voltage sag, and cell-temperature response. The maximum discharge current reached -238.2 A under the 200 kg cargopayload and one-passenger condition, and the current interval exceeding 150 A lasted up to 27 s. The maximum instantaneous power was 11.05 kW. Thermal analysis showed that the cell-temperature rise was within 2°C and the maximum measured cell temperature was 22.3°C. Linear regression of voltage and current yielded R² = 0.9368 and dV/dI = 0.0126 Ω, which was used as the DC internalresistance estimate. Based on these quantitative results and the cell specification limit of 300 A continuous discharge, the OCP threshold was reviewed from 250 A to 280 A to improve driving continuity while remaining below the allowable continuous-discharge current. EIS-based SOH estimation and the AI-BMS variable protection logic are presented as an extension framework for reflecting temperature and aging effects in future OCP-setting decisions.

Organic solar cells based on bulk heterojunction (BHJ) structures have attracted considerable attention because of their low fabrication cost, mechanical flexibility, and compatibility with solution-processing techniques. In BHJ organic photovoltaic devices, nanoscale morphology and crystallinity of the photoactive layer critically influence photovoltaic performance. In this study, the effects of solvent selection and thermal annealing on crystallization evolution and photovoltaic characteristics of P3HT:PCBM organic solar cells were systematically investigated. Three different solvents, including toluene, chlorobenzene (CB), and dichlorobenzene (DCB), were employed for active-layer fabrication, followed by post-thermal annealing treatment. UV–visible absorption spectroscopy revealed solvent-dependent differences in molecular ordering and intermolecular π–π interactions within the active layer. X-ray diffraction analysis confirmed that thermal annealing significantly enhanced crystallinity and lamellar ordering of P3HT domains, particularly for CB-processed films. Electrical characterization demonstrated that solvent evaporation behavior strongly affects photovoltaic performance. Among the investigated devices, the thermally annealed CB-processed device exhibited the highest power conversion efficiency of 1.83% with an enhanced short-circuit current density of 7.057 mA cm⁻². The improved device performance is attributed to optimized crystallization behavior and balanced nanoscale phase separation induced by the moderate evaporation characteristics of CB. In contrast, although DCB-assisted films exhibited relatively strong optical absorption and enhanced crystallinity, excessively slow solvent evaporation likely induced excessive aggregation and coarse phase separation, limiting efficient photovoltaic characteristics. These results demonstrate that solvent engineering combined with thermal annealing is an effective strategy for controlling morphology evolution and crystallization behavior in P3HT:PCBM bulk heterojunction solar cells.

Polymer nanocomposites incorporating inorganic nanofillers have emerged as highly promising electromagnetic interference (EMI) shielding materials, combining mechanical compliance with robust conductive percolation networks. Carbon nanotubes (CNTs) are particularly attractive as conductive fillers because their high aspect ratio facilitates percolation at low loadings. Also, CNTs offer superior mechanical durability under deformation compared to rigid, fracture-prone metal nanowires. For EMI shielding, high electrical conductivity is critical as it enhances both reflection and absorption through efficient charge dissipation and conduction losses. However, achieving highly aligned conductive pathways without degrading the intrinsic electrical properties of CNTs remains a significant challenge. Here, we demonstrate a non-destructive magnetic surface-functionalization and alignment strategy. Using a polydopamine (PDA)-mediated route, pristine multiwalled CNTs are uniformly decorated with Fe₃O₄ nanoparticles (FMWCNTs). This enables highly effective magnetic field-driven alignment at fields as low as 10 mT, promoting the strategic formation of percolation networks. By optimizing the Fe₃O₄/MWCNT ratio for high saturation magnetization and uniform coverage, the aligned FMWCNTs exhibit significant electrical anisotropy, delivering a 10.7-fold higher electrical conductivity in the parallel configuration compared to the vertical configuration. These findings present a scalable, room-temperature platform for engineering directionally enhanced conductivity in polymer nanocomposites, with broad applicability in advanced EMI shielding, flexible electronics, and advanced packaging technologies.

Citations

• Interfacial Engineering of Composite Piezoelectric Fibers Via an Anchor-Chain Architecture
  Jun Liu, Qiao Zhou, Pengcheng Zhang, Shuying Hu, Fang Zhou, Shuangshuang Ren, Ting Guo, Leiying Miao
  ACS Applied Engineering Materials.2026; 4(8): 4367.     CrossRef

There is an increasing demand for freeform stretchable display technologies capable of overcoming spatial limitations in next-generation platforms such as augmented reality (AR) and virtual reality (VR). To realize such stretchable displays, all constituent materials—including semiconductors, electrodes, insulators, and substrates—must exhibit sufficient mechanical elasticity. To date, stretchable gate insulators have primarily relied on organic polymers such as poly(4-vinylphenol-co-methyl methacrylate) (PVP-co-PMMA). However, their practical application is significantly limited by poor electrical properties, including low dielectric constant and instability. In this work, we propose a novel gate insulator structure that minimizes the use of solution-based processes, which often suffer from poor uniformity and may damage underlying layers during fabrication. The proposed structure integrates the advantages of both organic and inorganic materials by employing a hybrid configuration. Specifically, high-k HfO₂ thin films are deposited on both the top and bottom of an organic layer composed of PVP-co-PMMA, poly(melamine-co-formaldehyde) (PMF) as a crosslinking agent, and propylene glycol monomethyl ether acetate (PGMEA) as a solvent. This inorganic–organic–inorganic structure effectively compensates for the inherent electrical limitations of organic materials. As a result, the fabricated thin-film transistors (TFTs) exhibit improved electrical performance and reliability compared to devices employing a single organic gate insulator.

GaN nanowire (NW)-based hybrid structures have attracted attention for optoelectronic applications due to their high surface area and efficient carrier transport. However, the optical transparency of GaN NWs is often limited by unintended residual species accumulated on the surface and in the inter-wire regions, as well as defect-related absorption, leading to reduced light transmission. In this work, we demonstrate that thermal annealing significantly improves the optical transparency of GaN NWs grown on indium tin oxide (ITO)/glass substrates. The transmittance increased from 47.9% to 78.5% at 550 nm after rapid thermal annealing at 800^oC for 3 min, while a comparable value (~75.5%) was achieved at 600^oC for 5 min. PbBr₃ was deposited onto the GaN NWs to form hybrid structures, and temperature-dependent photoluminescence (TDPL) measurements revealed enhanced emission stability with suppressed peak shift and reduced spectral broadening. Arrhenius analysis based on a two-channel model revealed that the activation energy of the dominant non-radiative recombination pathway increased from 62 meV in the as-grown sample to 85 meV after thermal annealing, while its relative contribution remained nearly unchanged. In contrast, the shallow trap-assisted pathway exhibited a similar activation energy of approximately 6 meV in both samples, but its contribution decreased from 0.35 to 0.17 after annealing. As a result, the internal quantum efficiency (IQE) improved from 75.9% to 87.4%. These results show that thermal annealing improves optical transparency by removing residuals and suppresses defect-related recombination, leading to enhanced carrier dynamics and improved optical performance of PbBr₃-based hybrid structures.

Metamaterials, as artificially engineered structures with unconventional mechanical and acoustic properties, have recently emerged as a transformative platform for enhancing the capabilities of triboelectric nanogenerator (TENG) systems. Since the invention of TENG devices, extensive efforts have been devoted to improving charge density, output stability, and overall performance. Conventional performance optimization strategies mainly rely on device-level improvements such as surface chemistry modification, microstructuring, and nanopatterning. However, limited emphasis has been given to system-level development of smart self-powered intelligent systems. The integration of metamaterials into TENG devices opens a new era by enabling frequency-selective localization, mechanical impedance matching, and controllable deformation pathways. These engineered mechanical structures not only improve energy harvesting efficiency but also introduce new functionalities into the system. This review systematically summarizes recent advances in metamaterial-integrated TENG systems across four major application domains: (i) energy harvesting, (ii) acoustic telecommunication and acoustic-to-electric conversion, (iii) self-powered sensing, and (iv) vibration suppression and monitoring. Overall, the integration of metamaterials into TENG systems will pave the way for next-generation sustainable, intelligent, self-powered devices with diverse functionalities.

Citations

• Fabrication and performance of integrated self-powered PAAM hydrogel flexible pressure sensors
  Huaikuan Zang, Chao Hu, Pan Niu, Yong Zhang
  Materials Science in Semiconductor Processing.2026; 214: 110899.     CrossRef
• Highly Stretchable Multiphase Composite Piezoelectret With Large Longitudinal and Transverse Piezoelectric Sensitivity for Self-Powered Electromechanical Sensors
  Yanfeng Lyu, Tiantian Gao, Jian Li, Zheng Hu, Xunlin Qiu, Yanxun Xiang, Fu-Zhen Xuan, Wee Chen Gan, Dietmar Auhl
  IEEE Sensors Journal.2026; 26(18): 27090.     CrossRef

Lead-free bismuth sodium titanate (BNT)-based ceramics have attracted strong attention as environmentally benign dielectric materials for high-efficiency electrostatic energy-storage capacitors. A key challenge is that pristine BNT typically exhibits large hysteresis, high remnant polarization, and limited dielectric reliability, which restrict recoverable energy storage and efficiency under practical electric fields. Here, we present a focused mini-review of recent studies to clarify how composition design, phase boundary tuning, defect chemistry, and microstructural control collectively enable slim or pinched polarization-electric field (P-E) behavior and improved energy-storage functionality in BNT-related bulk ceramics. The reviewed outcomes consistently show that stabilizing relaxor states governed by polar nanoregions (PNRs), often via solid-solution engineering and secondary relaxor/antiferroelectric-like incorporation, suppresses irreversible switching and reduces hysteresis loss, while densification and grain-size control enhance electrical homogeneity and breakdown strength. In addition, defect-mediated tuning of oxygen vacancy-related complexes is highlighted as an independent lever to control relaxor ergodicity and polarization reversibility, providing a complementary route to slim-loop optimization. These insights are expected to guide integrated design strategies that couple phase/relaxor-state engineering with defect and microstructure optimization, accelerating the development of reliable, temperature-robust, lead-free dielectric capacitors based on BNT-related ceramics.

Citations

• Progress and outlook of dielectric energy storage characteristics of Lead–free (K,Na)NbO3 based bulk ceramics/composite films for capacitors
  Twinkle, Varun Kamboj, Chetna, Arun Kumar Singh, Gurpreet Singh, Sanjeev Kumar
  Current Opinion in Solid State and Materials Science.2026; 44: 101297.     CrossRef
• Structural Stability and Electromechanical Response of Lead-Free (Bi1/2Na1/2)TiO3‒SrTiO3 Ceramics Under A-Site Strontium Non-Stoichiometry
  Yubin Kang, Trang An Duong, Gwang-Hwi Jeong, Chang Won Ahn, Yong-Jai Kwon, Hyoung-Su Han
  Journal of Electrical and Electronic Materials.2026; 39(5): 549.     CrossRef

The recent rapid adoption of electric vehicles (EVs) is creating new load characteristics in the distribution system, and in particular, the widespread use of single-phase charging methods is exacerbating phase load imbalances, leading to voltage unbalance issues. Such voltage imbalances can undermine the stability of the distribution system and may cause side effects such as reduced power quality and shortened equipment lifespan. This study proposes a smart distribution panel system that can detect voltage imbalance issues caused by uneven electric vehicle charging loads in real time and actively compensate for them. The proposed system aims to contribute to the stability and power quality improvement of the distribution network by integrating a load balancing algorithm with inter-phase voltage monitoring functionality.

Bismuth layer-structured ferroelectrics with high Curie temperatures have recently attracted significant attention as promising candidates for high-temperature piezoelectric applications. However, the conventional solid-state reaction method entails high-temperature processing that induces bismuth volatilization, thereby degrading device reliability. In this study, we employed a co-precipitation method enabling atomic-level mixing to significantly lower the synthesis temperature of Nb/Tadoped Bi₄Ti₃O₁₂ ceramics compared to the solid-state reaction method. Experimental results demonstrated that the coprecipitation method yielded a pure single phase at 600℃ without intermediate phases. Furthermore, the synthesized nanopowders, with an average size of 100 nm, lowered the onset temperature of sintering shrinkage to 650℃, approximately 200℃ lower than that of the solid-state counterpart. The low-temperature synthesis process proposed in this work is expected to contribute to the performance enhancement of high-temperature piezoelectric devices by effectively suppressing bismuth volatilization and ensuring compositional stability.

Breakdown strength is an essential parameter for evaluating the electrical performance and degradation behavior of cable insulation and IEC 60243 also emphasizes its importance for detecting changes in insulation characteristics due to aging. However, the current IEC standards are mainly limited to specifying electrode configurations and test voltage conditions for breakdown tests, while the influence of insulating oil, is not clearly addressed. In this study, the breakdown strength of a 66 kV wet-type submarine cable was experimentally evaluated using insulating oils with different kinematic viscosities of 10, 100, 500, and 1,000 cSt in order to achieve reliable and reproducible breakdown measurements. The experimental results show that the measured breakdown strength decreases by up to approximately 20% depending on the oil viscosity. This indicates that the viscosity of the insulating oil has a significant influence on the measured breakdown strength during breakdown test. Therefore, it is necessary to perform breakdown strength measurements under identical test conditions, including the physical properties of the insulating oil, to ensure reliable comparison and accurate assessment of insulation performance and degradation characteristics.

The increasing global demand for renewable energy has accelerated the deployment of offshore wind farms, thereby highlighting the need for advanced development and performance assessment techniques for dynamic submarine cables used in floating offshore wind systems. These cables are continuously subjected to combined thermal, electrical, and mechanical stresses, with mechanical loading playing a particularly dominant role. As a result, dynamic submarine cables exhibit degradation behaviors that differ significantly from those of conventional fixed submarine cables. This paper presents the design and implementation of a comprehensive evaluation system capable of applying combined thermal, electrical, and mechanical stresses to dynamic submarine cables. The system was validated using a 66 kV wet type submarine cable through commissioning tests and insulation performance measurements. Electrical stress of 72 kV, thermal stress exceeding 95°C, and mechanical stress corresponding to a bending radius of 20 times the cable diameter over 20 cycles were applied to verify system reliability. The subsequent insulation assessments quantitatively confirmed performance variations induced by the combined stresses. The results demonstrate that the proposed platform is the first system capable of simultaneously applying thermal, electrical, and mechanical stresses to dynamic submarine cables, and its operational performance has been successfully validated. This platform enables realistic reliability evaluation of dynamic cables used in floating offshore wind farms and is expected to improve the overall operational reliability of offshore wind power systems.

As electric vehicles (EVs) are rapidly adopted worldwide, large numbers are now transported by sea on dedicated car carriers. With this trend, concerns are increasing about fires and explosions caused by battery thermal runaway during marine transport, while existing SOC limits before loading remain largely empirical. This study experimentally investigates gas generation and explosion characteristics of EV lithium-ion cells under thermal runaway conditions representative of enclosed vehicle decks. We identify and quantify the main off-gas components and clarify the flammability behavior and explosion limits of key combustible species. The results provide basic data for assessing EV battery accidents at sea and support the development of safer ventilation and gas-management strategies for ships.

This study investigates the effect of mask material and thickness on the silicon etching profile using a high-density plasma (HDP) etching system, aiming to reduce optical loss in silicon-based optical waveguides. As the mask thickness increased, the etching sidewall angle became steeper. An etching profile angle of 87° was obtained when tetraethyl orthosilicate (TEOS) was used as the mask material, while 80° was obtained for photoresist (PR). This is attributed to electron charging on the mask surface in the plasma. The charged mask modifies the distribution and strength of the electric field depending on its thickness, thereby affecting the trajectory of positive ions accelerated toward the substrate by the bias voltage. Furthermore, Plasma diagnostics using optical emission spectroscopy (OES) and surface composition analysis using field emission Auger electron spectroscopy (FE-AES) revealed that changes in the mask material also alter the reaction pathways and formation characteristics of active species and silicon by-products in the plasma. These results suggest that the mask material influences the overall plasma characteristics, including electron density and ion energy, and plays a critical role in the precise control of silicon etching profiles for high-performance optical device fabrication.

Cellulose nanofiber (CNF) has attracted significant attention as a next-generation insulating material due to its ecofriendly nature and outstanding functionalities. However, conventional kraft insulation paper suffers from limited dielectric breakdown strength and long-term reliability under high-voltage conditions, highlighting the need for alternative materials. In this study, kraft pulp was combined with five types of CNFs (A, B, C: wood-based / D, E: non-wood-based) to fabricate composite insulation papers, and their electrical and mechanical properties were systematically evaluated. The results showed that CNF incorporation generally enhanced density and tensile strength, while certain types contributed to lowering dielectric constant and improving breakdown strength. Among the wood-based CNFs, type C exhibited the most balanced performance in terms of dielectric stability and mechanical reinforcement. Among the non-wood-based CNFs, type E demonstrated notable improvements in structural compactness and tensile strength, suggesting favorable reliability. Therefore, this study identifies CNF C among wood-based types and CNF E among non-wood-based types as the most promising candidates for insulation performance enhancement, suggesting their applicability as next-generation insulating materials for power equipment and ecofriendly electronic devices.

Flexible and wearable electronics, which require stable operation under mechanical deformation, are increasingly utilizing Eutectic Gallium-Indium (EGaIn) for their conductive components. This study presents a systematic approach to fabricating highly reliable, deformable electrodes via a direct-ink-writing (DIW) 3D printing process using EGaIn as the functional ink. We conducted a thorough optimization of key printing parameters, specifically the extrusion pressure and printing speed, to achieve stable and uniform conductive lines. Through this optimization, we successfully established an optimal process window, achieving a stable line width of approximately 130 μm at an extrusion pressure of 300 kPa and a printing speed of 16 mm/s. The fabricated flexible electrodes exhibited exceptional electromechanical stability, maintaining negligible resistance change (< 0.82%) both under severe bending (3 mm radius) and after 100 repetitive bending cycles. This work demonstrates that the 3D printing of EGaIn is a viable and effective method for creating robust, high-performance electrodes for the next generation of deformable and wearable electronic devices.

AlGaN/GaN High Electron Mobility Transistors (HEMTs) are emerging as next-generation semiconductors optimized for high-power and high-frequency applications, with their performance highly dependent on the surface and interface quality of the AlGaN/GaN structure. In particular, the 2-Dimensional Electron Gas (2DEG) formed in the AlGaN layer is susceptible to trapping by surface defects, which degrades electrical characteristics and makes the device vulnerable to degradation. In this study, we propose an approach to enhance device reliability and performance by forming a gallium oxynitride (GaON) interfacial layer through O₂ plasma treatment on the AlGaN surface. This method effectively suppresses interface defects, resulting in improved electrical properties such as reduced interface trap density (Dit), threshold voltage (Vth) shift, increased drain current density (Id), and enhanced transconductance density (gm). Furthermore, this surface treatment demonstrates the potential for process simplification by improving the electrical characteristics of power semiconductor devices without the need for complex deposition steps.

e investigated the effects of post-annealing in vacuum, nitrogen, and hydrogen atmospheres on the structural, electrical, and optical properties of 600 nm thick Al-doped ZnO (ZnO:Al) thin films deposited by RF magnetron sputtering at room temperature. Post-annealing in hydrogen atmosphere at 400℃ for 1 hour showed the most significant improvement in electrical properties. Resistivity decreased from 9.11×10⁻³ to 1.4×10⁻³ Ω·cm, electron mobility increased from 4.11 to 18.23 cm²/V·s, and electron carrier concentration increased from 1.63×10²⁰ to 4.85×10²⁰ cm⁻³. In contrast, post-annealing in vacuum and nitrogen atmospheres resulted in degraded electrical properties due to oxygen and nitrogen chemisorption at grain boundaries. The enhancement in hydrogen-annealed films was attributed to the formation of additional oxygen vacancies and desorption of adsorbed oxygen species from grain boundaries. All films maintained excellent optical transparency of 80-90% in the visible range. The optical bandgap exhibited a blue-shift from 3.365 eV to 3.624 eV due to the Burstein-Moss effect induced by the increased electron carrier concentration. These results confirmed that hydrogen atmosphere post-annealing is the most effective method for enhancing the electrical conductivity of ZnO:Al thin films while maintaining high optical transparency.

With the advancement of the information society, the demand for highly integrated and multi-functional electronic devices is rapidly increasing. To meet these demands, high-performance transistors with low power consumption, high-speed operating, and mechanical flexibility are essential. Among various candidates, semiconducting single-walled carbon nanotubes (s-SWCNT)-based transistors, which exhibit intrinsically ambipolar characteristics, have emerged as promising components for CMOS-like circuits. In this study, s-SWCNT were selectively dispersed using rr-P3DDT, a thiophene-based conjugated polymer, and filed-effect transistors (FETs) were fabricated by inducting directional alignment for enhanced charge transport through an off-centered spin-coating process. The electrical characteristics of the fabricated s-SWCNT FETs were evaluated under various thermal annealing conditions (100℃, 150℃, 200℃, and 250℃). Off-centered spin-coated and high temperature annealed s- SWCNT FETs exhibited high field-effect mobilities over 5 cm²/Vs in both p-type and n-type operation, along with ideal Vshaped ambipolar transfer curves. These results indicate a significant enhancement in ambipolar performance due to efficient desorption of residual oxygen and water molecules in active channel via high temperature annealing. Furthermore, CMOS-like inverter circuits demonstrated an ideal inversion voltage (VIN = V_DD/2) and a high voltage gain of approximately 9.5. These findings highlight the potential of SWCNT-based materials for realizing next-generation flexible electronic circuits that combine high-performance, energy efficiency, and simplified solution-processing.

Thermal batteries are designed to activate at high temperatures (~500℃), therefore, the electrodes used in these systems are typically made into pellet form using compression molding techniques that do not involve polymer binders. However, the compression molding technique poses limitations in scaling up the electrode area without increasing thickness for high-power properties. Additionally, the tape casting method has been studied as a way to solve with, but too low a loading level is still an obstacle to practical use. This study fabricated a film cathode of high loading level (35.79 mAh·cm^-2) using the tape casting method for these problem. As utilized fabricated cathode, it investigated the influence of electrode thickness and density on electrochemical performance. Furthermore, a film cathode with a larger area but the same amount of active material as the pellet was fabricated, enabling the design of high-power cells with the same energy density. We expect that the fabricated film cathode with a high loading level and scalable area will enable the development of various thermal battery designs.

Citations

• Manufacturing Process Optimization of Oxide-Based Multilayer Ceramic Batteries Using Multilayer Ceramic Processing Technologies
  Won-Su Lee, Jong Kyu Lee, Jung Rag Yoon
  Journal of Electrical and Electronic Materials.2026; 39(5): 519.     CrossRef

Molybdenum disulfide (MoS₂) is a promising 2D semiconductor material for low-power electronics due to its excellent electrical properties and compatibility with conventional processes. In this study, MoS₂ thin films deposited by RF sputtering were etched using Cl₂/Ar plasma in an ICP system. The effects of Cl₂ gas ratio, RF power, and process pressure on etch rate and MoS₂/SiO₂ selectivity were investigated. Optimal results were obtained at 25% Cl₂, achieving ~38 nm/min etch rate and selectivity of 3.0. Increased source power improved both etch rate and selectivity, while higher bias power enhanced etching but reduced selectivity due to stronger ion bombardment. XPS analysis confirmed Mo－Cl and S－Cl bond formation after etching, indicating chemical reactions and some by-product residue. These results provide insights into optimized plasma etching of sputtered MoS₂ films for advanced 2D device fabrication